Overlapping Logos SBCCOM Online Menu Bar  


Return to SBCCOM - Natick Public Affairs

Public Affairs Office title

U.S. Army Soldier & Biological Chemical Command
U.S. Army Soldier Systems Center-Natick
Public Affairs Office
Kansas Street
Natick, MA 01760-5012

Contact: Chief, Public Affairs Office
(508) 233-5340

Date: May 30, 2002
No: 02-25

Textiles get wired

Natick, Mass. -- Future warrior systems include heads-up displays, global positioning systems, combat identification sensors, chemical detectors, electronically-controlled weapons and physiological status monitors connected to the warfighter's computer for instant information access.

A manufacturing technology program at the U.S. Army Soldier Systems Center (Natick) is exploring ways to integrate electric wires and fiber optics into textile materials that will enable future warfighters sophisticated battlefield capabilities without the weight and bulk.

Several production-based manufacturing processes are being investigated to develop the techniques needed to support mass production capabilities of electro-optic textiles, said James G. Fairneny, an electrical engineer and project manager for Manufacturing Processes for Integration of Electro-Optic Conductors and Devices Into Textiles at Natick.

"The goal is to provide the warfighter with executable functions that require the fewest possible actions on his or her part to initiate a response to a situational combat need by means of intelligent textiles," he said.

Cooperation between Natick Soldier Center's Individual Protection Directorate and the Objective Force Warrior Technology Program Office, Communications and Electronics Command at Fort Monmouth, N.J., and several other military, academia and industry groups are involved with various textile-based projects to make it possible.

Invisible antenna

A multi-frequency antenna vest is being worked on by researchers at the Naval Postgraduate School in Monterrey, Calif., as one option to eliminate the antenna troops now carry. The antenna will provide coverage in the 30-500 MHz and 300-2,000 MHz frequencies using an ultra-wideband antenna with no visual signature.

Similarly, a prototype to replace the antenna for the low-frequency band SINGARS radio was built into a fabric vest by BAE SYSTEMS Aerospace Inc. Manufacturing technology examined the fabrication and feasibility of building transmission lines and radiation elements for the wearable textile-based antenna.

Clean connection

Existing round plug-ins for the cabling on the Land Warrior's computer are bulky, costly and prone to failure because of the fragile pin and socket connection, said Fairneny.

Exponent in Natick and Thor Electronics Inc., in Salinas, Calif., are working to upgrade the network cables and manufacture a flat, pinless connector with recessed contacts. This connector uses flat pieces of metal that can easily be designed in 11, 21 and 31 pinless contacts for various cable configurations as a small and flat connector. The setup dramatically reduces the cost of existing custom connectors now used by Land Warrior.

The prototype ultra-low-profile rectangular connector system has a plug and receptacle in controlled-force breakaway and quick disconnect configurations, and can be used in a fabric-based bus or conventional cables.

Leaner and lighter yet rugged, the connector eliminates the expensive pin and socket assembly process. It meets military requirements for environmental and electrical compatibility, and parts are domestically available and made in high volume.

Additionally, the American Competitive Institute (a consortium of industry and academia) in Philadelphia will investigate alternative components for flat body conformal connectors and cables. Several commercial-off-the-shelf products are being considered with concept designs to modify the manufacturing process to lower product costs.

Electrical testing and environmental evaluation is being conducted on modified and all-new products.

Blended fibers

One way of removing external wires and creating a more distributed network of sensors and electronics is to weave the wires right into the fabric.

Photonics Laboratories, Inc. in Philadelphia and the Philadelphia School of Textiles have a contract to develop manufacturing processes for integrating optical fibers and traditional wires into woven and knitted textiles. With these technologies, conductors and optical-electronic systems could be weaved into soldier's uniforms during large-scale manufacturing.

"They're looking at the physical interaction of wires or optics as it goes through machinery," Fairneny said. Textile structures are physically and mechanically different from fiber optics or wires. "Fiber optics bent too much will break, while metal wires don't bend back and can get fatigued."

At the Philadelphia School of Textiles, researchers are investigating the mechanical motion of textile fibers so that it's possible to make modifications to incorporate fiber optics and conductive wires. Mechanical parts that produce sharp bending were identified for potential change as well as looking at a variety of fiber optics most able to handle bending.


Another way of incorporating electrical networks into soldier clothing is through stitchless seam technologies that were first developed by Clemson University with prior Natick Mantech funds.

The technique entraps fiber optics and conductors either on top of or along the seam of the fabric. Clemson Apparel Research at Clemson University in Pendleton, S.C., is investigating combinations of wires to form the electrical characteristics of commercial cables, available connectors, and garment-to-garment and undergarment-to-garment mechanisms.

"One difficulty will be trying to connect the top to the bottom for a complete uniform network," Fairneny said.

Clemson is considering the specific network needed for Land Warrior laser sensors on the helmet cover and a general network for the Battle Dress Uniform (BDU) top. The first samples of fabric containing electrical wires and a helmet cover network have been provided.

Fiber keyboard

In a move to eliminate bulky and heavy gear, such as Land Warrior's soldier control unit, WRONZ EuraLab in the United Kingdom was contracted to develop a soft switch fabric with the required sensitivity to be operational on the sleeve of a BDU and seamless incorporation into the garment.

"The keyboard would be pressure-sensitive, not touch-sensitive, for use on the battlefield," Fairneny said. "Land Warrior's soldier control unit is a box that sits on the chest. It would be better to integrate that into the clothing for reduced weight."

One goal is to produce a keypad on the sleeve that can interface as the soldier control unit with specific military functions. A textile data bus and necessary connectivity to transport the signal from the keyboard to the control electronics is another goal.

Fairneny said an initial prototype is expected to provide three or four keys needed for a few simple commands to prove the concept.

Further development should lead to a BDU housing to hold the electronics and a fabric-based display.

Natick is part of the U.S. Army Soldier and Biological Chemical Command (SBCCOM). For more information about SBCCOM or the Soldier Systems Center (Natick), please visit our website at http://www.sbccom.army.mil.


[Home] [Feedback] [Sitemap] [Search] [About SBCCOM]
[Products] [Programs] [Services] [Facilities] [Bus.Ops.] [Hooah]
Go to Home Go to Feedback Go to Site Map Go to Search Go to About SBCCOM Go to Products Go to Programs Go to Services Go to Facilities Go to Business Opportunities Go to What's Hooah